The Freedom CIimber is an innovative, non-motorized, rotating, climbing wall which provides continuous, challenging, fun climbing in a safe, harness- free environment.
Free to climb without the threat of falling from dangerous heights and free to climb without the necessity of belaying devices, the Freedom Climber puts all the benefits of climbing easily within your reach.
The Freedom Climber was designed with the objective of providing continuous climbing in as small a space as possible. Extending out from the wall just 8 inches and fitting in a room with 8 foot ceilings it achieved that objective and now provides facilities, wanting to efficiently use their space, to offer to their members the benefits of climbing.
Being non-motorized and using the action of climbing to cause the rotation, the Freedom Climber rotates quietly either clockwise or counter-clockwise.
Product Features
+ Mounts to Wall and has Minimal Footprint.
+ Virtually Maintenance Free.
+ Requires No Electricity.
+ Rugged Components.
+ Climbing Holds can be Changed to Increase Degree of Difficulty.
+ Quiet Operation.
+ Adjustable Rotational Speed.
+ Strengthens Grip.
+ Increases Blood Flow.
Available Options:
Digital Display
+ Monitors Time Climbed
+ Elevation Climbed
+ Calories burned while climbing
The display can track the progress of three different climbers
simultaneously. For example, three climbers are wanting to challenge
each other during a 30 minute workout. Climber 1 hits the start button
and climbs for 3 minutes. Then, when the back button is pressed, Climber
2 can choose to start and climb for 3 minutes as well, and the display
will track the elevation climbed and calories burned. Then Climber 3 can
do the same and when done, press back which allows Climber 1 to resume
where she left off. At the end of the 30 minutes each climber can see
how many feet they climbed in relation to the others.
Static Panel
The static panel is the two vertical rows of holds on the left
hand side of the unit. It is a 4 foot wide panel with the same surface
as the Freedom Climber. It is flush with the Freedom Climber so climbers
can traverse on and off. The placement of the climbing holds allows the
user to do vertical training than can also be done on the center
section of the Freedom Climber.
By adding the static panel, the Freedom Climber becomes a workout
station where 5 individuals can work out simultaneously in a circuit
that includes: rotational climbing – vertical training
– suspension training – high connected resistance training – low connected resistance training
Custom Color Holds
The holds for the Freedom Climber can be custom made to match
most color themes and logos. Examples are shown below and the pantone
color chart shows the vast array of colors that are available. Please call 718-366-7804 Monday - Friday during normal business hours EST for more information.
If you would like any of these options please call 718-366-7804 to place your order.
Dimensions
Where most fitness equipment occupies floor space, the space saving design of the Freedom Climber hugs a wall and has a footprint of 5.5 SF, compared to the average treadmill that has a footprint of 15 SF. The Freedom Climber will even fit in rooms with 8 foot ceilings. ( see photos for more) That Freedom Climber was installed in a room with 9 foot ceilings. In such settings, the top angle piece is left off and the finish height is 94 inches.
Product Specifications
|
Shipping Dimensions
|
48”W x 96”L x 26”H
|
|
Shipping Weight
|
1110 Lbs.
|
